Wi-Fi Gigabit Router N300

Wi-Fi Gigabit Router N300

WLR-4004 v1 003

Firmware, Treiber und andere Software
Windows Mac OS

Firmware

Was ist Firmware?

  • Firmware 1.05

    Veröffentlichungsdatum : 21 November 2018 Versionsnummer : 1.05

    Improvements:

    - The router scans the environment for surround networks. This is done every 24 hours. Based on the results the router will automatically switch to a different WiFi channel to improve the speed and stability of the WiFi signal. This switch will be done at night so the customer experience will not be hindered.
    -There's an extra page available on the 2.4GHz WiFi page inside the routers web interface where the connected WiFi clients are shown. Signal strength and transmitted and received bytes are shown, among other things.

    - On the 2.4 GHz WiFi settings page inside the routers web interface it's now possible to set the WiFi mode to '802.11n only'. This will exclude older 802.11b and/or 802.11g clients and can improve the speed of the WiFi network.

    Fixes:

    - After enabling the guest network it's no longer possible to disable it. An error message is shown. This problem is now fixed.

    Firmware herunterladen

  • Firmware 1.04

    Veröffentlichungsdatum : 20 January 2016 Versionsnummer : 1.04

    - Improved stability and possibly higher data throughput of the WiFi signal in crowded 2.4GHZ environments. This is achieved by automatically dropping the channel width to 20MHz of other 20MHz signals are detected in the environment.
    - A 'Check for updates' button is added on the firmware update page. This can be used to manually check for firmware updates on the Sitecom servers. An automatic check is done once a week. When an update is found, a pop-up will be shown in the user interface.
    - 2 messages regarding the automatic firmware update function are added in the system log: 'New firmware detected' and 'No new firmware detected, new check in xxxxx seconds'. When a new firmware is detected, a special update page will be shown where the update can be performed.
    - On the startpage of the webinterface, the versionnumber is added to the modelnumber.
    - Userinterface login issue with the Microsoft Edge browser is fixed.

    Firmware herunterladen

  • Firmware 1.0

    Veröffentlichungsdatum : 13 May 2015 Versionsnummer : 1.0

    Original firmware
     

    Firmware herunterladen

  • Firmware 1.03

    Veröffentlichungsdatum : 13 May 2015 Versionsnummer : 1.03

    1.03
    - Patch for WAN DHCP unicast release issue

    1.02
    - Patch for CE EN300328 1.8.1 update

    1.01
    - Update header image in webGUI with correct image

    1.00
    - Original Firmware

    Firmware herunterladen
  • Versionsnummer 1.05 21 November 2018
  • Versionsnummer 1.04 20 January 2016
  • Versionsnummer 1.0 13 May 2015
  • Versionsnummer 1.03 13 May 2015

Handbuch

Quellcode

Was ist Quellcode?
  • GNU/GPL Source Code Versionsnummer 1.05
  • GNU/GPL Source Code Versionsnummer 1.04
  • GNU/GPL Source Code Versionsnummer 1.03